View V23003A37B104_7706197.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

telecom-, signal and rf relays axicom cradle relay p v23003 108-98015 ? nov. 07 ? rev. c ? ecoc: jm10
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 2 of 14 telecom-, signal and rf relays cradle relay p v23003 c index dimensions 4 coil data and operating range 5 relay code 6 coil data and ordering information 7 instructions for impulse operation 9 contact data 10 insulation / general data 12 disclaimer while tyco electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, tyco electronics does not guarantee that it is error-free, nor does tyco electronics make any other representati - on, warranty or guarantee that the information is accurate, correct, reliable or current. tyco electronics reserves the right to make any adjustments to the information contai - ned herein at any time without notice. tyco electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or ftness for a particular purpose. it is recommended that you test any new or replacement product before incorpo - rating into a system. the dimensions in this datasheet are for reference purpo - se only and are subject to change without notice. specif - cations are subject to change without notice.
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 3 of 14 telecom-, signal and rf relays cradle relay p v23003 c hand solder and plug-in relays, for dc operation, polarized, latching rohs compliant (directive 2002/95/ec) as per product date code 0501. features ? primarily intended for impulse operation ? highly reliable ? multi purpose relay ? great variety of contact arrangements and materials to meet specifc applications ? sockets for easy and quick mounting of relays (see datasheet accessories) ? contacts for signal loads and currents up to 5 a typical applications ? for applications where the switching status must be maintained ? measuring systems relay types ? size i or ii, depending on contact set ? standard contact sets with max. 4 changeover, 2 break contacts, special confgurations on request ? single or bifurcated contacts ? hand solder terminals also for plug-in connection with screw fxing ? dust-protected
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 4 of 14 telecom-, signal and rf relays cradle relay p v23003 c dimensions dimensions in mm type v23003-a0xxx size i type v23003-b0xxx size ii hand solder terminals, silver-plated also for plug-in connection and screw fxing with earth terminal dust-protected for sockets and hold-down springs see data sheet accessories
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 5 of 14 telecom-, signal and rf relays cradle relay p v23003 c coil data and operating range nominal voltage from 6 vdc to 60 vdc typical nominal power consumption, at 20 c 1.5 w class of the operative range acc to en 61810-1 / iec 61810-1 and vde 0435 part 201 1 operating voltage (according to the coil type) max. 73% of the nominal voltage with continuous operation only one winding at a time may be energized within the specifc voltage range. the minimum voltage u i and the maximum voltage u ii depends on the ambient temperature. u i tamb = u i 20 c k i tamb u ii tamb = u il 20 c k ii tamb t amb = ambient temperature u i tamb = minimum voltage at ambient temperature, t amb u ii tamb = maximum voltage at ambient temperature, t amb k i and k ii = factors operate - negative potential at start of winding release - plus potential at start of winding ambient temperature [c] ambient temperature [c]
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 6 of 14 telecom-, signal and rf relays cradle relay p v23003 c coil number versions see page 7/8 v23003 basic type number of cradle relay p relay type a0 = size i, b0 = size ii, contact set / type of contact see page 11 ordering example: v23003-b0037-f104 cradle relay p, size ii, dust-protected, coil 24 vdc, 2 changeover contact set, single contacts, contact material silver, gold-fashed note: the ordering scheme enables a multitude of variations. however, not all variations are defned as construction specifcations (ordering code) and thus in the current delivery program. special design can be carried out to customer specifcations. please contact your local representative. relay code
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 7 of 14 telecom-, signal and rf relays cradle relay p v23003 c coil data (values at 23 c) ordering information nominal voltage unom operate/set voltage range coil power winding terminals coil resistance relay code tyco part number start end minimum voltage umin maximum voltage umax vdc vdc vdc mw ? / 15 % v23003-axxxx standard, size i 12.00 8.00 13.50 1440 i 3 2 100 v23003a25b104 1393817-4 8.00 13.50 ii 4 1 100 12.00 8.00 13.50 1440 i 3 2 100 v23003a25c104 1393817-5 8.00 13.50 ii 4 1 100 24.00 16.50 26.50 1440 i 3 2 400 V23003A37B104 1393817-7 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003a37b604 1393817-8 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003a37c104 1393817-9 16.50 25.00 ii 4 1 340 60.00 44.00 65.00 1500 i 3 2 2400 v23003a44b104 1-1393817-8 44.00 65.00 ii 4 1 2400 48.00 33.50 49.00 1646 i 3 2 1400 v23003a64b104 2-1393817-0 33.50 49.00 ii 4 1 1400 48.00 33.50 49.00 1646 i 3 2 1400 v23003a64b604 2-1393817-1 33.50 49.00 ii 4 1 1400 48.00 33.50 49.00 1646 i 3 2 1400 v23003a64c104 2-1393817-2 33.50 49.00 ii 4 1 1400 v23003-axxxx 5a, size i 6.00 4.00 6.70 1469 i 3 2 24.5 v23003a26f106 1393817-6 4.00 6.70 ii 4 1 24.5 24.00 16.50 26.50 1440 i 3 2 400 v23003a37f101 1-1393817-0 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003a37f105 1-1393817-1 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003a37f106 1-1393817-2 16.50 25.00 ii 4 1 340
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 8 of 14 telecom-, signal and rf relays cradle relay p v23003 c v23003-bxxxx standard, size ii 12.00 8.00 13.50 1440 i 3 2 100 v23003b25b110 3-1393817-1 8.00 13.50 ii 4 1 100 12.00 8.00 13.50 1440 i 3 2 100 v23003b25c110 3-1393817-2 8.00 13.50 ii 4 1 100 6.00 4.00 6.70 1469 i 3 2 24.5 v23003b26b110 3-1393817-4 4.00 6.70 ii 4 1 24.5 6.00 4.00 6.70 1469 i 3 2 24.5 v23003b26c110 3-1393817-5 4.00 6.70 ii 4 1 24.5 24.00 16.50 26.50 1440 i 3 2 400 v23003b37b110 3-1393817-9 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003b37b610 4-1393817-0 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003b37c110 4-1393817-1 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003b37c112 4-1393817-2 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003b37c116 1413004-2 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003b37c117 4-1393817-3 16.50 25.00 ii 4 1 340 24.00 16.50 26.50 1440 i 3 2 400 v23003b37c410 4-1393817-4 16.50 25.00 ii 4 1 340 60.00 44.00 65.00 1500 i 3 2 2400 v23003b44b110 5-1393817-4 44.00 65.00 ii 4 1 2400 60.00 44.00 65.00 1500 i 3 2 2400 v23003b44b129 5-1393817-5 44.00 65.00 ii 4 1 2400 60.00 44.00 65.00 1500 i 3 2 2400 v23003b44b610 1413004-1 44.00 65.00 ii 4 1 2400 60.00 44.00 65.00 1500 i 3 2 2400 v23003b44b610 1-1419137-0 44.00 65.00 ii 4 1 2400 60.00 44.00 65.00 1500 i 3 2 2400 v23003b44c110 5-1393817-6 44.00 65.00 ii 4 1 2400 60.00 44.00 65.00 1500 i 3 2 2400 v23003b44w84 5-1393817-8 44.00 65.00 ii 4 1 2400 48.00 33.50 49.00 1646 i 3 2 1400 v23003b64b110 6-1393817-3 33.50 49.00 ii 4 1 1400 48.00 33.50 49.00 1646 i 3 2 1400 v23003b64c110 6-1393817-4 33.50 49.00 ii 4 1 1400 v23003-bxxxx 5a, size ii 12.00 8.00 13.50 1440 i 3 2 100 v23003b25f104 3-1393817-3 8.00 13.50 ii 4 1 100 6.00 4.00 6.70 1469 i 3 2 24.5 v23003b26f104 3-1393817-6 4.00 6.70 ii 4 1 24.5 24.00 16.50 26.50 1440 i 3 2 400 v23003b37f104 4-1393817-5 16.50 25.00 ii 4 1 340 60.00 44.00 65.00 1500 i 3 2 2400 v23003b44f104 5-1393817-7 44.00 65.00 ii 4 1 2400 48.00 33.50 49.00 1646 i 3 2 1400 v23003b64f104 6-1393817-5 33.50 49.00 ii 4 1 1400 coil data (values at 23 c) ordering information nominal voltage unom operate/set voltage range coil power winding terminals coil resistance relay code tyco part number start end minimum voltage umin maximum voltage umax vdc vdc vdc mw ? / 15 %
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 9 of 14 telecom-, signal and rf relays cradle relay p v23003 c instructions for impulse operation cradle relay p is primarily intended for impulse operation. the maximum voltage stated in the table (page 2) can be increased for impulse operation as follows: u ii impuls = u ii tamb . q u ii tamb = maximum continuous voltage at ambient temperature t amb q = factor the impulse voltage must not exceed 80% of the test voltage (winding/frame or winding/winding) or 3.3 times at ambient temperature = 20 c and 2.3 times at ambient temperature < 20 c the value of the maximum voltage listed in the table (page 2). ift ed 3 s then q = ift ed = pulse width t 2 = cycle time if ted = > 3 s the value of q must be obtained from the nomograph (cradle relay n datasheet page 103). examples of various periodic pulse trains (energizing side) 1. periodic recurrence of one energizing pulse t ed = t i + t ii t i = pulse width of the positive pulse at the start of the winding t i + t ii = pulse width of the negative pulse at the start of the winding ti + t ii = pulse widths within one cycle 2. periodic recurrence of two unequal energizing pulses
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 10 of 14 telecom-, signal and rf relays cradle relay p v23003 c contact data ordering code block 3 b104/b110 b604/b610 c104/c110 c404/c410 f104 ... f107 number of contacts and type max. 4 changeover contacts, 2 break contacts or 2 make contacts contact assembly single contacts bifurcated contacts single contacts contact material silver, gold-fashed gold f silver, gold-fashed gold f silver, gold-fashed max. switching voltage 150 vdc 36 vdc 150 vdc 36 vdc 250 vdc 125 vac 30 vac 125 vac 30 vac 250 vac max. switching current 2 a 0.2 a 2 a 0.2 a 5 a max. switching capacity 35 to 70 w see load limit curve page 10 50 va 5 w 5 va 35 to 70 w see load limit curve page 10 50 va 5 w 5 va 50 to 140 w see load limit curve page 10 500 va max. continuous current at max. ambient temperature 2 a 5 a max. dc load breaking capacity safe breaking, no stationary arc contact material silver, gold-fashed safe breaking, no stationary arc contact material silver, gold-fashed for contact sets f1xx i = switching current u = switching voltage i = switching current u = switching voltage for contact sets b1xx and c1 xx
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 11 of 14 telecom-, signal and rf relays cradle relay p v23003 c size i number of contacts and type 2 changeover contacts 2 make contacts 2 break contacts 1 break 1 make contact symbols with base conncections 3 2 4 1 - + - + coil i coil ii contacts in release condition, coil polarity to set the relay contact assembly single contacts bifurcated contacts single contacts contact material silver, gold-fashed ordering code block 3 b104 c104 f105 f107 f106 contact material gold f ordering code block 3 b604 c404 size ii number of contacts and type 4 changover contacts 2 changover contacts symbols with base conncections 3 2 4 1 - + - + coil i coil ii contacts in release condition, coil polarity to set the relay contact assembly single contacts bifurcated contacts single contacts contact material silver, gold-fashed ordering code block 3 b110 c110 f104 contact material gold f ordering code block 3 b610 c410 contact sets
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 12 of 14 telecom-, signal and rf relays cradle relay p v23003 c insulation general data ordering code block 3 b1xx b6xx c1xx c4xx f1xx test voltage (1 min) winding / frame contact / contact contact / frame 500 vac rms 500 vac rms 500 vac rms 500 vac rms 1000 vac rms 1000 vac rms ordering code block 3 b1xx b6xx c1xx c4xx f1xx operate time at u nom and 20 c, typical 4 ms reset time typical 4 ms maximum switching rate without load 20 operations/s ambient temperature range acc. to en 61810-1 / iec 61810-1 and vde 0435 part 201 -40 c ... +70 c thermal resistance 50 k/w maximum temperature 100 c continuous thermal load 1.6 w degree of protection acc. to en 60529 / iec 60529 / vde 0470 part 1 dust-protected ip 30 mechanical endurance approx. 10 7 operations mounting position any weight v23003-a0xxx size i v23003-b0xxx size ii approx. 25 g approx. 30 g
108-98015 rev. c all specifcations subject to change. consult tyco electronics for latest specifcations. 13 of 14 telecom-, signal and rf relays cradle relay p v23003 c im relays 4th generation slim line C low profle polarized 2 c/o telecom signal relay with bifurcated contacts, available as non latching or latching relay with 1 coil. nominal voltage range from 1.5 ... 24 v, coil power consumption of 50 ... 200 mw, latching relays with 1 coil 100 mw. the im relay is available as through hole and surface mount type (j-legs and gull wings) and capable to switch loads up to 60 w/62,5 va. it is currently the only 2 a rated 4g relay on the market. dielectric strength fulflls the telcordia requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the im relay is tested according cecc/iecq and certifed in accordance with iec/en 60950 and ul 60950. dimensions approx. 10 x 6 mm board space and 5.65 mm height. p2 relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 24 v, coil power consumption 140 mw, latching relays with 1 coil 70 mw. the p2 relay is available as through hole or surface mount type and capable to switch currents up to 5 a. dielectric strength fulflls the telcordia requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the p2 relay is tested according cecc/iecq and certifed in accordance with iec/en 60950 and ul 60950. dimensions approx. 15 x 7,5 mm board space and 10 mm height. fx2 relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. nominal voltage range from 3 ... 48 v, coil power consumption of 80 ... 260 mw for the high sensitive version, 140... 300 mw for the standard version, latching relays with 1 coil 100 mw. the fx2 relay is available as through hole type and capable to switch loads up to 60 w/62,5 va. dielectric strength fulflls the telcordia requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the fx2 relay is tested according cecc/ iecq and certifed in accordance with iec/en 60950 and ul 60950. dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. ft2 / fu2 relays 3rd generation non polarized, non latching 2 c/o telecom relay with bifurca - ted contacts. nominal voltage range from 3 ... 48 v, coil power consumption 200 ... 300 mw. most sensitive 48 v relay. available as through hole and surface mount type. dielectric strength fulflls the telcordia requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the ft2/fu2 relay is tested according cecc/iecq and certifed in accordance with iec/en 60950 and ul 60950. dimensions approx. 15 x 7,5 mm board space and 10 mm height. fp2 relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 48 v, coil power consumption of 80 ... 260 mw for the high sensitive version, 140... 300 mw for the standard version, latching relays with 1 coil 100 mw.. the fp2 relay is available as through hole type and capable to switch loads up to 60 w/62,5 va. dielectric strength fulflls fcc part 68 (1,5 kv C 10 / 160 s). the fp2 is tested according cecc/iecq approved. dimensions approx. 14 x 9 mm board space and 5 mm height. mt2 2nd generation non polarized, non latching 2 c/o telecom and si - gnal relay with bifurcated contacts. nominal voltage range from 3 ... 48 v, coil power consumption 150/200/300/400 and 550 mw. dielectric strength fulfills the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 20 x 10 mm board space and 11 mm height. d2n relays 2nd generation non polarized 2 c/o relay for telecom and various other ap - plications. nominal voltage range from 3 ... 48 v, coil power consumption from 150 .... 500 mw. the d2n relay is capable to switch currents up to 3 a. dielectric strength fulflls the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 20 x10 mm board space and 11 mm height. p1 relays extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 24 v, coil power consumption 65 mw, latching relays with 1 coil 30 mw. the p1 relay is available as through hole or surface mount type and capable to switch currents up to 1 a. dielectric strength fulflls the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 13 x 7,6 mm board space and 7 mm height for tht or 8 mm height for smt version. w11 relays low cost, non polarized 1 c/o relay for various applications. nominal voltage range from 3 ... 24 v, coil power consumption 450 mw, sensitive versions 200 mw. the w11 relay is capable to switch currents up to 3 a. dielectric strength 1000 vrms. dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. reed relays high sensitive, non polarized relay for telecom and various other applica - tions, available with 1 n/o, 2 n/o or 1c/o contacts. nominal voltage range from 5 ... 24 v, coil power consumption 50...280 mw for 1 n/o and 125 ... 280 mw for 2 n/o or 1 c/o versions. reedrelays are available in dip or sil housing and capable to switch currents up to 0,5 a. integrated diode and/or electrostatic shield optional. dielectric strength 1500 vdc. dimen - sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for dip or 19,8 x 5 mm board space and 7,8 mm height for sil version. cradle relays extremely reliable and mature relay family of 1st generation for various signal switching applications. available as non polarized, polarized / latching and relay with ac coil. the beneft is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 vdc to 220 vac. cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 a. forcibly guided (linked) contact sets optional. dielectric strength 500 vrms. dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. other relays we offer a variety of different relay families for maintenance and replace - ment purposes. these relays are up to 60 years old now, such as card relay sn (v23030 series), small general purpose relay (v23006 series), small polarized relay (v23063 ... v23067 and v23163 ... v23167 series). accessories like sockets, hold down springs, etc. optional. high frequency relays hf3 / hf3s / hf6 series rf relays offering excellent rf characteristics in a small package. all hf series relays are suitable for smd soldering processes. available as non latching or latching versions with 1 or 2 coils and a nominal coil voltage range from 3 24 v, a coil power consumption of 140 mw or 70 mw (single coil latching types). low cost rf relay suitable up to 3 ghz. impedance 50 and 75 ohm. 50 w hot switching and 50 w rf power carry capability. dimensions 14.6 x 7.3 x 10.3 mm. high performance, high power rf relay suitable up to 3 ghz, 50 w hot switching and 150 w rf power carry capability. dimensions 15 x 7.6 x 10.6 mm. high performance, high power rf relay suitable up to 6 ghz, 50 w hot switching and 50 w rf power carry capability. dimensions 15 x 7.6 x 10.6 mm.
telecom-, signal and rf relays axicom tyco electronics logistics ag werk axicom au seestrasse 295 ch-8804 au-w?denswil / switzerland phone +41 44 782 91 11 fax +41 44 782 90 00 e-mail: axicom@tycoelectronics.com tyco electronics paulsternstrasse 26 d-13629 berlin / germany phone +49 30 386 38573 fax +49 30 386 38575 e-mail: axicom@tycoelectronics.com tyco electronics ec trutnov s.r.o. komenskho 821 cz-541 01 trutnov / czech republic e-mail: axicom@tycoelectronics.com tyco electronics corporation pob 3608, harrisburg, pa 17105, usa phone +1 800-522-6752

▲Up To Search▲

Price & Availability of V23003A37B104

	To Download V23003A37B104 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .